Tahoe Fescue Pro Artificial Turf

95 oz, 1.875" Height, Ribbed S Blade.


Tahoe Fescue Pro, Synthetic Grass Warehouse, Tiger Turf, side


Designed to replicate natural grass.

Artificial Turf Material Description

  • 95 oz. Total Weight, 1.875" Height
  • Ribbed S Blade
  • Rolls 15 ft Wide
  • Polyethylene


Tahoe Fescue Pro, Synthetic Grass Warehouse, Tiger Turf, top
Tahoe Fescue Pro, Synthetic Grass Warehouse, Tiger Turf, macro

Professional Opinion

Tahoe Fescue Pro artificial turf is a soft and heavy grass with superior cushioning. Its recovery rate is lower than average and took some brushing to realign the blades. Turf temperature under the direct sun is higher than average due to its density. The material is resistant to wear and tear but did show signs of heavy use.

See the results and test specifications below.

Test Results


Meter showed 74 degrees of angle adjustment.

Softer than average.


 The tennis ball jumped 17 inches. This grass provides double cushioning compared to office carpet.


Blades recovered 80% 

Temperature test

The recorded temperature is 137.3 degrees. This is 7.3 degrees warmer than a piece of plastic under the same conditions.

Wear and Tear

Blades changed shape, recovered to 65%. Wear is visible. No structural damage to blades or backing.

Test Specifications

Every test we conduct is measured and compared to a test item for easier understanding.

How do you measure turf softness?

We brush the turf 5 times with an angle measurement tool that is resistant to friction. The softer the turf, the less movement we will see on the ruler.

The fewer degrees on the ruler, the softer the turf.

How do you measure cushion?

We drop a tennis ball #3 from 6 ft. above directly on the surface of the turf to measure the cushion.  The less it bounces, the more cushion the artificial grass provides.

We compare results to the bounce carpet provides for clarity.

How do you determine turf recovery?

We place a 30lb weight on the artificial grass material for 5 minutes, then wait 15 minutes at room temperature and measure blade length compared to the original. 


How do you measure temperature?

We measure the temperature under the direct sun after 30 minutes of exposure without wind.

As a data backup, we compare this to the temperature of a stainless steel plate under the same conditions.

How do you assess wear and tear?

We apply an abrasive brush to the turf for a period of 30 seconds and observe the blade's structure afterward. We look for damage, twist, recovery, and blade structure deformation.

Need help?

Request professional assistance from our support team.

Receive a custom quote with options.