Platinum Heatmaxx 90 Artificial Turf

110 oz, 2.0" Height, Durable Nylon.


Platinum Heat Maxx 90, Imperial Synthetic Turf, side

$10.98 per sq. ft.

Durable and resistant. Guaranteed not to melt from sun reflection.

Artificial Turf Material Description

  • 110 oz. Total Weight, 2.0" Height
  • Tall and Durable Blade
  • Rolls 15 ft Wide
  • Nylon


Platinum Heat Maxx 90, Imperial Synthetic Turf, top
Platinum Heat Maxx 90, Imperial Synthetic Turf, macro

Professional Opinion

Platinum HeatMaxx 90 artificial turf is a turf with less than average softness that provides a superior cushion. It recovers well and looks new after a bit of brushing. Turf temperature under the direct sun is lower than average. The material is resistant to wear and tear and showed durability during the test.

See the results and test specifications below.

Test Results


Meter showed 108 degrees of angle adjustment.

Stiffer than average.


 The tennis ball jumped 15 inches. This grass provides over double the cushion of our office carpet.


Blades recovered 94%.

Temperature test

The recorded temperature is 131.2 degrees. This is 5.6 degrees cooler than a piece of plastic under the same conditions.

Wear and Tear

Blades didn't change shape, recovered to 90%. No wear is visible. No structural damage to blades or backing.

Test Specifications

Every test we conduct is measured and compared to a test item for easier understanding.

How do you measure turf softness?

We brush the turf 5 times with an angle measurement tool that is resistant to friction. The softer the turf, the less movement we will see on the ruler.

The fewer degrees on the ruler, the softer the turf.

How do you measure cushion?

We drop a tennis ball #3 from 6 ft. above directly on the surface of the turf to measure the cushion.  The less it bounces, the more cushion the artificial grass provides.

We compare results to the bounce carpet provides for clarity.

How do you determine turf recovery?

We place a 30lb weight on the artificial grass material for 5 minutes, then wait 15 minutes at room temperature and measure blade length compared to the original. 


How do you measure temperature?

We measure the temperature under the direct sun after 30 minutes of exposure without wind.

As a data backup, we compare this to the temperature of a stainless steel plate under the same conditions.

How do you assess wear and tear?

We apply an abrasive brush to the turf for a period of 30 seconds and observe the blade's structure afterward. We look for damage, twist, recovery, and blade structure deformation.

Need help?

Request professional assistance from our support team.

Receive a custom quote with options.