Full recycle-60 Artificial Turf

60 oz, 1.5" Height, Double W Blade.


Full Recycle-60, Global Syn Turf, Side

$4.45 per sq. ft.

Vibrant green. Uses 100% recyclable materials.

Artificial Turf Material Description

  • 60 oz. Total Weight, 1.5" Height
  • Double W Shape Blade
  • Rolls 15 ft Wide
  • Polyethylene


Full Recycle-60, Global Syn Turf,  top
Full Recycle-60, Global Syn Turf, macro

Professional Opinion

Full Recycle 60 artificial turf provides average softness and less than average cushioning because it lacks density. It recovers at an average rate and looks new after some brushing. Turf temperature under the direct sun is lower than average because it's so lightweight. The material is resistant to wear and tear but will show signals of heavy use.

See the results and test specifications below.

Test Results


Meter showed 78 degrees of angle adjustment.

Average softness.


 The tennis ball jumped 23 inches. For reference, the office carpet makes the ball jump 36 inches.


Blades recovered 88%  

Temperature test

The recorded temperature is 118.2 degrees. This is 9 degrees cooler than a piece of plastic under the same conditions.

Wear and Tear

Blades changed shape, recovered to 75%. Wear is becoming visible. No structural damage to blades or backing is showing.

Test Specifications

Every test we conduct is measured and compared to a test item for easier understanding.

How do you measure turf softness?

We brush the turf 5 times with an angle measurement tool that is resistant to friction. The softer the turf, the less movement we will see on the ruler.

The fewer degrees on the ruler, the softer the turf.

How do you measure cushion?

We drop a tennis ball #3 from 6 ft. above directly on the surface of the turf to measure the cushion.  The less it bounces, the more cushion the artificial grass provides.

We compare results to the bounce carpet provides for clarity.

How do you determine turf recovery?

We place a 30lb weight on the artificial grass material for 5 minutes, then wait 15 minutes at room temperature and measure blade length compared to the original. 


How do you measure temperature?

We measure the temperature under the direct sun after 30 minutes of exposure without wind.

As a data backup, we compare this to the temperature of a stainless steel plate under the same conditions.

How do you assess wear and tear?

We apply an abrasive brush to the turf for a period of 30 seconds and observe the blade's structure afterward. We look for damage, twist, recovery, and blade structure deformation.

Need help?

Request professional assistance from our support team.

Receive a custom quote with options.