Californian Royal 89 Artificial Turf

109 oz, 1.7" Height, Soft W Blade.


Californian Royal 89, Imperial Synthetic Turf, side view

$4.82 per sq. ft.

As soft as a bunny. Cool and bouncy.

Artificial Turf Material Description

  • 109 oz Total Weight, 1.7" Height
  • Soft W Blade
  • Rolls 15 ft Wide
  • Polyethylene


Californian Royal 89, Imperial Synthetic Turf, top view
Californian Royal 89, Imperial Synthetic Turf, macro view

Professional Opinion

Californian Royal 89 artificial turf is a soft artificial turf with great cushioning. It recovers well but requires a bit of brushing to look new. Turf temperature under the direct sun is higher than average because its heavy weight. The material is resistant to wear and tear but will show signs of heavy use.

See the results and test specifications below.

Test Results


Meter showed 68 degrees of angle adjustment.

Softer than average.


 The tennis ball jumped 18 inches. This grass provides double caution compared to office carpet.


Blades recovered 92% 

Temperature test

The recorded temperature is 131.5 degrees. This is 2.8 degrees warmer than a piece of plastic under the same conditions.

Wear and Tear

Blades changed shape, recovered to 70%. Wear is visible. No structural damage to blades or backing.

Test Specifications

Every test we conduct is measured and compared to a test item for easier understanding.

How do you measure turf softness?

We brush the turf 5 times with an angle measurement tool that is resistant to friction. The softer the turf, the less movement we will see on the ruler.

The fewer degrees on the ruler, the softer the turf.

How do you measure cushion?

We drop a tennis ball #3 from 6 ft. above directly on the surface of the turf to measure the cushion.  The less it bounces, the more cushion the artificial grass provides.

We compare results to the bounce carpet provides for clarity.

How do you determine turf recovery?

We place a 30lb weight on the artificial grass material for 5 minutes, then wait 15 minutes at room temperature and measure blade length compared to the original. 


How do you measure temperature?

We measure the temperature under the direct sun after 30 minutes of exposure without wind.

As a data backup, we compare this to the temperature of a stainless steel plate under the same conditions.

How do you assess wear and tear?

We apply an abrasive brush to the turf for a period of 30 seconds and observe the blade's structure afterward. We look for damage, twist, recovery, and blade structure deformation.

Need help?

Request professional assistance from our support team.

Receive a custom quote with options.