all natural 75 Artificial Turf

103 oz, 1.75" Height, Diamond Blade.

 

All Natural 75, Global Syn Turf, side

$3.67 per sq. ft.

Dense for shock absorption. One of the most natural-looking.

Artificial Turf Material Description

  • 103 oz. Total Weight, 1.75" Height
  • Diamond Blade
  • Rolls 15 ft Wide
  • Polyethylene

Photos

All Natural 75, Global Syn Turf, top
All Natural 75, Global Syn Turf, macro

Professional Opinion

All Natural 75 artificial turf is a soft grass that provides superior cushioning. Its recovery rate is average. Turf temperature under the direct sun is around average. The material showed signs of wear and tear with the blades changing shape.

See the results and test specifications below.

Test Results

Softness

Meter showed 72 degrees of angle adjustment.

Softer than average.

Cushion

The tennis ball jumped 17 inches. This grass provides over double the cushion of an office carpet.

Recovery

Blades recovered 85% 

Temperature test

The recorded temperature is 134.7 degrees. This is 7.5 degrees warmer than a piece of plastic under the same conditions.

Wear and Tear

Blades changed shape, recovered to 70%. Wear is visible. No structural damage to blades or backing is showing.

Test Specifications

Every test we conduct is measured and compared to a test item for easier understanding.

How do you measure turf softness?

We brush the turf 5 times with an angle measurement tool that is resistant to friction. The softer the turf, the less movement we will see on the ruler.

The fewer degrees on the ruler, the softer the turf.

How do you measure cushion?

We drop a tennis ball #3 from 6 ft. above directly on the surface of the turf to measure the cushion.  The less it bounces, the more cushion the artificial grass provides.

We compare results to the bounce carpet provides for clarity.

How do you determine turf recovery?

We place a 30lb weight on the artificial grass material for 5 minutes, then wait 15 minutes at room temperature and measure blade length compared to the original. 

 

How do you measure temperature?

We measure the temperature under the direct sun after 30 minutes of exposure without wind.

As a data backup, we compare this to the temperature of a stainless steel plate under the same conditions.

How do you assess wear and tear?

We apply an abrasive brush to the turf for a period of 30 seconds and observe the blade's structure afterward. We look for damage, twist, recovery, and blade structure deformation.

Need help?

Request professional assistance from our support team.

Receive a custom quote with options.